NexSIGN Core
Connected LED displays to inform and guide
NexSIGN Core combines RGB LED displays, a Central Unit and a web interface. Broadcast your messages indoors and outdoors, with no network cabling to the displays.
The system
Three components, ready to broadcast
The displays, the Central Unit and the web interface work together.
RGB LED displays
96 × 64 pixel screen, 58 × 39 × 8 cm, IP65 protection. Colour text and pictograms, indoors and outdoors.
Central Unit
It controls the displays over 2.4 GHz radio frequency, up to 1,000 m in open field. Network connection via Ethernet RJ45 PoE.
Web interface
Broadcast your messages, adjust brightness and monitor signal quality from a browser.
Uses
Inform and guide
Site entrance, car park, logistics area, event venue: NexSIGN Core displays the right message where it needs to be read.
You change the message from the web interface, without touching the display.
- Welcome message at a site entrance
- Car park information and visitor guidance
- Guidance in logistics areas
- Information at an event venue
Setup
From installation to broadcast
Install the displays
VESA mount on a wall, on a pole or suspended. Mains or battery power depending on the location.
Connect the Central Unit
It communicates with the displays by radio: no network cable to run to them.
Broadcast from the web interface
Write your message, adjust the brightness and publish.
Technical highlights
All specifications are listed on the Specifications page.
Display
- Technology
- RGB LED, P6 pitch
- Resolution
- 96 × 64 pixels
- Dimensions (W × H × D)
- 58 × 39 × 8 cm
- Protection
- IP65, indoor and outdoor
- Power supply
- Mains or battery
Radio link
- Frequency
- 2.4 GHz
- Range
- Up to 1,000 m in open field
Warranty
- Duration
- 1 year (parts, labour, return to base)
Frequently asked questions
How does NexSIGN Core differ from other SignaleX products?
They all run on the same hardware. NexSIGN Core is the general-purpose offering. NexFLAG, NexPROD and NexSCHOOL are configured for karting, industry and schools.
Can a display be installed outdoors?
Yes. The display is IP65-rated and suitable for both indoor and outdoor use.
Can NexSIGN Core be connected to our software?
Tell us about your integration needs. We will tell you what can be done on your site today.
How does a demonstration work?
On your site or by video call. Contact us to arrange an appointment.
See NexSIGN Core in action
We organise a demonstration on your site or by video call.